Ultrafiltration (UF) Plant

Ultrafiltration (UF) uses hollow-fibre membranes with pore sizes of 0.01–0.1 microns to remove suspended solids, turbidity, bacteria, viruses, colloidal silica and large organic molecules from water. UF does not remove dissolved salts (TDS), making it ideal as a pre-treatment step before RO, as a standalone drinking water system for low-TDS sources, and for wastewater reuse.

Ultrafiltration (UF) membrane plant manufacturer in Coimbatore - Intellect Aqua

How UF works

  • Hollow-fibre membranes: water is fed outside the fibres and filtered inward (outside-in flow) at low operating pressure (0.5–2 bar).
  • Barrier filtration: particles, bacteria and colloids larger than 0.01 µm are blocked by the PVDF membrane — no chemicals needed for filtration.
  • Backwash and CIP: automatic backwash (every 20–60 min) keeps flux high. Periodic chemical clean-in-place (CIP) restores membrane performance.
  • Output: turbidity <0.1 NTU, bacteria-free water suitable for drinking or as feed to an RO plant.

Key membrane features

  • PVDF hollow-fibre membrane — resistant to oxidising agents and chlorine
  • Outside-in filtration — higher suspended solids tolerance
  • Low operating cost — no high-pressure pump needed
  • Compact modular design — easy to scale up

Where UF plants are used

  • RO pre-treatment — protects RO membranes from turbidity and SDI
  • Municipal and community drinking water supply
  • STP / ETP tertiary treatment for wastewater reuse
  • Swimming pool and cooling tower side-stream filtration
  • Hospitals, food and beverage industries
  • Surface water and river water treatment

UF vs RO — which one do you need?

  • UF removes: turbidity, suspended solids, bacteria, viruses, colloidal silica. Does not reduce TDS or dissolved salts.
  • RO removes: dissolved salts, TDS, hardness, nitrates, fluoride, bacteria. Good for high-TDS borewell water.
  • UF + RO together: UF pre-treats turbid or biological feed water before the RO plant, extending RO membrane life and reducing operating cost.

What decides the price

  • Raw water turbidity and SDI
  • Capacity required (LPH or KLD)
  • Membrane brand and module count
  • Automation — manual vs fully automatic CIP
  • Pre-filtration required (sand filter, cartridge)
  • Integration with RO or STP system
Free Consultation
Get a Free Site Visit & Quote

Consult with certified water treatment engineers. Call +91 95859 75551 or send your requirement.

Thank you! Your enquiry has been sent successfully. Our engineers will contact you shortly.